Albrecht AE125H Specifications download pdf (Page 91)

English 91

3. Scroll to select Set CTCSS/DCS and press Pgm/E.

4. Scroll to select one of the following options:

• Off - the scanner ignores all tones and opens squelch on

any signal

• CTCSS - the scanner prompts the user for the

appropriate tone. Squelch will open for this channel only

if the tone matches.

• DCS - the scanner prompts the user for the appropriate

code. Squelch will open for this channel only if the code

matches.

• CTCSS/DCS Search - the scanner displays any

tone/code being used, but opens squelch on any signal.

• No Tone - indicates that the channel squelch will only

open if no CTCSS/DCS is detected.

• <Back - returns to Channel Menu.

Note: If you select Off, CTCSS/DCS Search, or No Tone, the

scanner returns to the channel menu. If you selected CTCSS

or DCS, you can then select the CTCSS tone or DCS code.

5. Scroll to select, then press Pgm/E to save and return to the

Channel menu.

Setting Channel Modulation

1. To select a channel, press Hold and then enter the channel

number.

2. Press Pgm/E to enter the Channel menu. (You can also

press Hold and scroll to the channel; press Func then

Pgm/E.)

3. Scroll to select Set Modulation and press Pgm/E.

4. Scroll to select modulation from the following options :

• AM - the scanner uses AM modulation.

• FM - the scanner uses FM modulation.

5. Press Pgm/E to save and return to the Channel menu.

Note: If current frequency is air band, you cannot select FM modulation.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 175 176

No comments

Albrecht AE125H Specifications Page 91